Topic: New Page: All Printings

Today's release adds an All Printings page - a listing of the card database by printing - as opposed to the All Cards page which is grouped by card.

The All Printings page is mostly a generalization of the per-edition "checklist" view, that was accessible from the Editions page.

In addition to the previously existing counts controls columns (Inventory, Trade, Wishlist), there are now also columns for the Deck counts (built and all) - that work similarly to how they work in the other listings.

The count controls were a premium-only feature, they are now enabled for basic accounts too - at least temporarily. (It is ironic that implementing functionality restrictions is actually taking a non-trivial amount of time and actual UX design considerations... but I'm not sure how else to incentivize premium support, outside of outright limiting inventory sizes and deck counts...)

The Mass Input feature is still available on this page (but it needs to be filtered, one cannot just add 100.000 printings directly - I don't think that's a usecase?). The Mass Remove button that was on the edition page has been removed - this is doable now directly from the set (Inventory/Wishlist), by operating on a (filtered) selection.

Filters can be bookmarked on this listing too. In addition, when having more than 3 filter 'bookmarks' per set, that section is collapsible to not make the left menu insanely long.


Coming up next for this listing:
    Sort By button on the listing - right now only some columns have sortable headers, will add all sortable things into one button
    Spoiler / Visual View

Re: New Page: All Printings

The previous version was much more convenient.

Re: New Page: All Printings

The previous version still exists under 'All Cards (Grouped)'.

Re: New Page: All Printings

I'm so close to being able to make a filter for the cards that I need to add to my wishlist for a set.  What I would like to be able to do is:

set = <this set>
collector # <= <last forest>
# of cards in my collection = 0
cards in my collection != foil

Right now it is the 'not foil' that I can't express with the current filters.

I like the new view.  Once I can sort by 'count in inventory' I can see which card I have the most of.  It does help drive home how many different printings there are.

Re: New Page: All Printings

I meant the view with all the cards of the set on one page.
I used it during the draft to look at the price by card number, it was very convenient.

Re: New Page: All Printings

RomanB wrote:

I meant the view with all the cards of the set on one page.
I used it during the draft to look at the price by card number, it was very convenient.

I will take a look at the pagination options for when the listing is filtered by a single edition, I might allow the full set if < 1000 cards.

Re: New Page: All Printings

psrex wrote:

I'm so close to being able to make a filter for the cards that I need to add to my wishlist for a set.  What I would like to be able to do is:
[...]
Right now it is the 'not foil' that I can't express with the current filters.

Yeah, this would be technically possible, I'm unsure though how many things I can still fit into the filters until it gets too confusing haha. This would now imply adding 6 more filters "Inventory Foil Count", "Tradelist Foil Count", "Wishlist Foil Count", and 3 more for "not foil"? (And these would be then also useful in the sets themselves I suppose) Maybe I can find some idea to add this without it being overwhelming and confusing...

Re: New Page: All Printings

RomanB wrote:

I meant the view with all the cards of the set on one page.
I used it during the draft to look at the price by card number, it was very convenient.


Sebi, I think this new view has a lot of potential use-cases, but please don't get rid of the set-by-set view.  Those pages are very useful for collectors managing (and trying to complete) a large collection.  For example, I split my cards into foil and non-foil, and can use the options that were at the top (foil/nonfoil, condition, etc) to enter everything in two passes, without having to edit the individual card entries.

Re: New Page: All Printings

KnowThisGentleman wrote:

I think this new view has a lot of potential use-cases, but please don't get rid of the set-by-set view.  Those pages are very useful for collectors managing (and trying to complete) a large collection.  For example, I split my cards into foil and non-foil, and can use the options that were at the top (foil/nonfoil, condition, etc) to enter everything in two passes, without having to edit the individual card entries.

You can still do the same thing now - after filtering by an edition, use the "Mass Input" option on the top right. There are still defaults there, to set foil or non-foil, then mass-add one of each to the set.

Re: New Page: All Printings

I need to be able to have the card # listed when looking at the edition. Is there a way you can add this back in as a column option? It is difficult to manage my collection with out.

Noble Hierarch

Re: New Page: All Printings

Noble_Hierarch wrote:

I need to be able to have the card # listed when looking at the edition. Is there a way you can add this back in as a column option? It is difficult to manage my collection with out.

It's still listed, just next to the edition symbol instead of the first column by itself as it were before.

Re: New Page: All Printings

agree that the new pages are inconvenient, much rather almost useless. i was paying a membership for the convenience of these pages.

before we could add a card in ''available for trade'' and it was automaticaly added in the ''inventory''. That was abandonned and now we have to add both manualy which takes twice the time.

now it's even worst since we have to click on every single cards we wanna add manually adding a 3rd click to whenever we wanna add a card. As a set collector, i'm sad.

Re: New Page: All Printings

sorry - truly not a fan ... I would rather have an option for the "original" format

Re: New Page: All Printings

Hmm, it seems I have communicated these UI changes quite badly, since nothing in the old view has gone away, the entire functionality still exists now, nothing has been removed.

Jf_Aconcagua wrote:

agree that the new pages are inconvenient, much rather almost useless. i was paying a membership for the convenience of these pages.

before we could add a card in ''available for trade'' and it was automaticaly added in the ''inventory''. That was abandonned and now we have to add both manualy which takes twice the time.

now it's even worst since we have to click on every single cards we wanna add manually adding a 3rd click to whenever we wanna add a card. As a set collector, i'm sad.

I am not sure I understand what is now different here? Every button should do the same thing as before, if it does not it is a bug, and I will fix it. Could you tell me what you were doing before that does not work now? Which action requires more clicks?

Re: New Page: All Printings

JEdmunds71 wrote:

sorry - truly not a fan ... I would rather have an option for the "original" format

Could you tell me what you mean by "original" format? Is it the way the columns are now shown by default? The collector number not being on the left? Or is it that sets were rendered non-paginated? I will add a 1000 / page pagination option tomorrow, so that issue should go away at least.

Re: New Page: All Printings

Jf_Aconcagua wrote:

we could add a card in ''available for trade'' and it was automaticaly added in the ''inventory''. That was abandonned and now we have to add both manualy which takes twice the time.

Hmm, is this perhaps because only the Inventory count column is visible by default? You can enable whichever count columns are useful for you from the Columns selector in the table header. They will also remain like that, you only need to do it once. I changed the defaults thinking that perhaps so many count columns looks quite bad on a small screen and not many users want to see them all the time. (Especially since I added 2 sets of deck counts too).

Re: New Page: All Printings

The loss of being able to see the whole set on one page is honestly huge and enough to make me rethink my subscription.  That one feature was my initial reason for even subscribing.  The paginating on a big set makes it SO SLOW to go through a set and review what you have while you're sitting at a table going through the bulk bin trying to find the missing cards for the collection.  Waiting for the page to load and having to go back and forth because the bulk bins are so often an unsorted mess.

It makes it hard to enter for similar reasons, so for instance, before entering inventory I put everything in order by color and then alphabetically by set, not collector number because that would make things very hard to find in a large collection like mine.  Now when I sit down to enter them, think about a set like Jumpstart where the new cards are in the low collector numbers and the reprints are in the high numbers.  As you're going through entering alphabetically you have to go back and forth through the pages, just awful.  Yes, I can sort by card name, but now all the colors are mixed up.  In the old single page view, you just use page up/page down and go up and down the one page.  It's honestly frustratingly slow to maintain inventory and review what I have and am targeting.

I do love the site, still, but please reconsider the pagination for the edition pages and give us an option with more than 200 rows per page.  Thanks for listening and your consideration.

EDIT:  The loss of the related "editions/extras" to each set at the top of the page to get to the tokens and/or related lists is also pretty annoying.

Last edited by joemiiier (2025-07-21 02:05:45)

Re: New Page: All Printings

Yes BRING BACK the ability to see the whole set on one page!

Why do you keep fixing what is not broken?

I don't understand.

I still dislike the build whole "Deck Idea/Built Deck" thing. But I got used to it, though still it looks crappy.

But THIS is the reason I started paying you a subscription. The EDITIONS page was the best feature to me. And as a collector seeing all the cards on one page was worth the price!

Again, why do you do this? I don't understand.

Re: New Page: All Printings

Davidy212 wrote:

Why do you keep fixing what is not broken?

I don't understand.

I am trying to implement new features, pay off tech debt, and maintain this 18 year old website.

Please stop paying me a subscription and find another service that you like better, do not stay here pissed off and talking to me like I personally offended you. I promise I am actually trying to make things better, and not worse.

Yes BRING BACK the ability to see the whole set on one page!

As said above, I am adding a pagination option for full set, I need to finish the sorting changes first and import the new set in time for the prerelease.

Re: New Page: All Printings

joemiiier wrote:

The loss of being able to see the whole set on one page is honestly huge and enough to make me rethink my subscription.

I am adding a pagination option for 1000 cards. But also, no worries, go ahead and cancel your subscription, no need to feel tied to a service that does not solve your issues.

Re: New Page: All Printings

sebi wrote:
KnowThisGentleman wrote:

I think this new view has a lot of potential use-cases, but please don't get rid of the set-by-set view.  Those pages are very useful for collectors managing (and trying to complete) a large collection.  For example, I split my cards into foil and non-foil, and can use the options that were at the top (foil/nonfoil, condition, etc) to enter everything in two passes, without having to edit the individual card entries.

You can still do the same thing now - after filtering by an edition, use the "Mass Input" option on the top right. There are still defaults there, to set foil or non-foil, then mass-add one of each to the set.

Hey Sebi - long time user here and appreciate the continual updates. Two questions related to the above. Based on your suggestion, I was able to figure out how to set the default input selection to foil and then hit the "cancel" to close out, test it, and it worked out great. When I went back into mass input I clicked it back to regular/nonfoil and then when I went to close the screen hit "submit" instead of "cancel" so it added one of each to all my collection.

First question - Is there a way to Mass Unadd cards?
Second question/comment - is there a way from a UI perspective where those input flags for foil/non-foil options or the other ones could be selected in a screen where it does not have a chance for a misclick? Or maybe a much easier option perhaps is to have the default selection in the Mass Input tool be 0 cards so you choicefully have to shift it to 1 or 4 of each if you want to do the mass input?

Thanks again!

Re: New Page: All Printings

Not related to the new page, but did the hit box for clicking the links on the sidebar change in this update too? Now I have to click the word tradelist or wishlist or whatever to go to that page, but the link used to work by clicking anywhere in the rectangle that's highlighted when I hover. It's throwing off my muscle memory

Re: New Page: All Printings

Changed the pagination now to show the full edition, as discussed above.

cerussi wrote:

Hey Sebi - long time user here and appreciate the continual updates. Two questions related to the above. Based on your suggestion, I was able to figure out how to set the default input selection to foil and then hit the "cancel" to close out, test it, and it worked out great. When I went back into mass input I clicked it back to regular/nonfoil and then when I went to close the screen hit "submit" instead of "cancel" so it added one of each to all my collection.

First question - Is there a way to Mass Unadd cards?
Second question/comment - is there a way from a UI perspective where those input flags for foil/non-foil options or the other ones could be selected in a screen where it does not have a chance for a misclick? Or maybe a much easier option perhaps is to have the default selection in the Mass Input tool be 0 cards so you choicefully have to shift it to 1 or 4 of each if you want to do the mass input?

Thanks again!

Yeah, the defaults UI still needs some work. It is not at all obvious, but the defaults are "sticky", so you just set them once, and they will be saved for this session for all interactions, be it from this page, the inventory page, the card page, etc. If you set the Language to Italian for Inventory defaults, it will be set like this until you change it. Just selecting it in the dropdown already sets it, no need to click any "Save" button - which admittedly is quite confusing and unclear - I need to change this.

There is no way yet to Mass remove 1 of each card, but I do want to add some tools like this - and also to "Mass Change" a filtered listing in other ways - like set a condition etc.

That said, in the mean time, I can fix this for you if you wish. What was added by mistake exactly? Was it 1 of each printing from Final Fantasy?

We can also discuss this in a support ticket privately, maybe it's better than on this thread.

Re: New Page: All Printings

sebi wrote:

If you set the Language to Italian for Inventory defaults, it will be set like this until you change it. Just selecting it in the dropdown already sets it, no need to click any "Save" button - which admittedly is quite confusing and unclear - I need to change this.

There is no way yet to Mass remove 1 of each card, but I do want to add some tools like this - and also to "Mass Change" a filtered listing in other ways - like set a condition etc.

That said, in the mean time, I can fix this for you if you wish. What was added by mistake exactly? Was it 1 of each printing from Final Fantasy?

We can also discuss this in a support ticket privately, maybe it's better than on this thread.

Awesome sounds like you already had a couple things on the backlog list. Will be definitely be appreciated when some of those changes are made. And agreed will shoot you a ticket on the side. Thanks!

Re: New Page: All Printings

dude1818 wrote:

Not related to the new page, but did the hit box for clicking the links on the sidebar change in this update too? Now I have to click the word tradelist or wishlist or whatever to go to that page, but the link used to work by clicking anywhere in the rectangle that's highlighted when I hover. It's throwing off my muscle memory

Fixed now, thanks for bringing it up.